WebShare RB300
APPENDIX A: Troubleshooting
This chapter covers potential problems on Wireless Broadband Router Point and the corresponding remedies.
A.1 LEDs
The LEDs are useful aides for finding possible problem causes.
A.1.1 LED Power
The PWR LED on the front panel does not light up.
Steps | CORRECTIVE ACTION |
1Make sure that the Wireless Broadband Router power adaptor is connected to the device and plugged in to an appropriate power source. Use only the supplied power adaptor.
2Check that the Wireless Broadband Router and the power source are both turned on and the device is receiving sufficient power.
3If the error persists, you may have a hardware problem. In this case, you should contact your vendor.
A.1.2 LED LAN
The LAN LED on the front panel does not light up.
Steps | CORRECTIVE ACTION |
1Check the Ethernet cable connections between the Wireless Broadband Router and the computer or hub.
2Check for faulty Ethernet cables.
3Make sure your computer’s Et
4If these steps fail to correct the problem, contact your local distributor for assistance.
Pag. 68