WebShare RB300

3.2 Factory Default Settings

Before configuring the Wireless Broadband Router through WLAN, make sure that the SSID, Channel and the WEP was set properly.

The default setting of the Wireless Broadband Router that you will use:

∙User: admin

∙Password: admin

∙IP Address: 192.168.1.1

∙Subnet Mask: 255.255.255.0

∙DHCP Server: enable (192.168.1.100-192.168.1.199)

∙Wep Encryption: disable

∙SSSID: N Router

∙Channel: 6

3.2.1 Password

When there is a screen needs to enter the Network password, it means that there is a password settle, type in the password you entered before.

3.2.2 LAN and WLAN Ports

The parameters of LAN and WLAN ports are pre-set in the factory. The default values are shown below.

LAN

 

WLAN

IP address

192.168.1.1

Channel=6

Subnet Mask

255.255.255.0

SSID=N Router

 

 

Encryption=none

 

 

 

 

 

 

Pag. 12