Atlantis Land ATLMMR MNE01 user manual Rear ports, Cabling

2.3 The rear ports

Power	Connect the supplied power adapter to this jack
(jack)
Console	Connect the supplied Null type RS-232 cable to this
(port)	port when connecting to a PC’s RS-232 port (9-pin
	serial port).
ISDN So	Connect an RJ-45 cable to this port when
(RJ-45	connecting to the ISDN.
connector)
LAN	Connect an UTP Ethernet cable to this port when
(RJ-45	connecting to a LAN such as an office or home
connector)	network.

2.4 Cabling

Now you should be ready to connect your ISDN Router on your LAN and ISDN wall jacks. Follow these steps to install:

˙Attach the ISDN line to the ISDN connector (S/T interface).

˙

Connect the PC to the RJ-45 LAN connector. Two or more PCs can connect to a multi-port Hub first and then uplink (cascade) port on the hub must be connected to ISDN Router port.

˙Plug the power adapter into a wall outlet and into the AC connector on the back of ISDN Router.

˙The Auxiliary connector is only used to connect a terminal to run the Command Line Interface using the null modem cable. (This is an optional connection.)

4