Atlantis Land i I-Fly Wireless Access Point user manual Factory Default Settings, Reset

3.5 Factory Default Settings

Before configurating this AP, you need to know the following default settings.

Web Configurator

Username : admin

Password: admin

Device IP Network settings in LAN site

IP Address : 192.168.1.1

Subnet Mask : 255.255.255.0

DHCP server : DHCP server disable

Wireless

Channel=6

WEP/WAP=disable

3.5.1 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

	LAN Port
IP address	192.168.1.1
Subnet Mask	255.255.255.0
DHCP server	Disable

3.6 Reset

The default username and password are admin and admin respectively.

If you ever forget the password to log in, you may press the RESET button (for 12s) to restore the factory default settings(sez 3.5).

3.7 Configuration through Web Browser

Open the web browser, enter the local port IP address of this AP, which defaults at http://192.168.1.1, and click “Go”,