Chapiter 2
Using I-Fly Wireless Access Point
2.1 Cautions for using the
Do not place the AP under high humidity and high temperature. Do not use the same power source for AP with other equipment.
Do not open or repair the case yourself. If the AP is too hot, turn off the power immediately and have a qualified serviceman repair it.
Place the AP on a stable surface.
Only use the power adapter that comes with the package, Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
2.2 The Front LEDs
|
| LED |
|
| MEANING |
|
|
|
|
|
|
|
|
| 1 | POWER |
|
| ON=Indicates proper connection to power supply. |
|
|
|
| OFF= The unit is not receiving power |
| ||
|
|
|
|
|
| |
| 2 | LAN |
|
| ON= Indicates connection is established. |
|
|
|
| BLINKING= Data transmissions |
| ||
|
|
|
|
| OFF= No LAN connections |
|
| 3 | WLAN |
|
| ON= Link is established |
|
|
|
| BLINKING= Packet transmit or receive activity |
| ||
|
|
|
|
| OFF= No Link activity |
|
2.3 The Rear Ports
| PORT | MEANING |
|
|
|
1 | POWER (Jack) | Receptor for the Power Adapter |
|
|
|
2 | LAN | Auto MDI/MDIX LAN ports automatically |
|
| sense the cable type when connecting to |
|
| |
3 | RESET | After the device has turned on, press it (10s) to |
|
| reset the device or restore to factory default |
|
| settings. |
4
