•Enable 802.1x security by selecting “Enable”.
•If MD5 EAP method is used then you can skip step 2 and go to step 3.
•Select the Encryption Key Length Size ranging from 64 to 128 Bits that you would like to use. Select the Lifetime of the Encryption Key from 5 Minutes to 1 Day. As soon as the lifetime of the Encryption Key is over, the Encryption Key will be renewed by the Radius server.
•Enter the IP address, the Port and the Shared Secret used by the Primary Radius Server.
•Enter the IP address, the Port and the Shared Secret used by the Secondary Radius Server.
•Click “Apply” button for the 802.1x settings to take effect after Access Point reboots itself. NOTE: As soon as 802.1x security is enabled, all the wireless client stations that are connect to the Access Point currently will be disconnected. The wireless clients must be configured manually to authenticate themselves with the Radius server to be reconnected.
3.7.7 Tools
This page enables you to:
