|
|
| ENGLISH |
|
|
| |
3 | RESET | After the device has turned on (turn on the | |
power and wait 3 minutes), press and hold | |||
|
| reset button for 5 seconds, then release it | |
|
| to reset it (this is used when you can not | |
|
| login to the DiskMaster, e.g. forgot the | |
|
| password. | |
4 | POWER(ON/OFF) | Press the power switch to start/shutdown | |
the DiskMaster. It will take approximately 3 | |||
|
| minutes to boot up/and shutdown the | |
|
| Operating System. | |
5 | POWER (jack) | Connect the supplied power adapter to | |
this jack. | |||
|
|
|
|
Leave at least 10cm of space at the rear of the device for ventilation.
1.8 Default Settings
The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manuals.
Before you configure this device you need to know the following default settings:
∙Username: admin
∙Password: admin
∙IP address: 192.168.1.10
∙Server name: NAS
DiskMaster | 39 |