ENGLISH

1.10 Installing the NAS Utility

You can run the NAS Utility on either a Windows® XP or Windows® Vista operating system. Follow the steps below to install the NAS Utility onto your computer.

∙Turn on your computer and insert the supplied NAS Utility CD into the CD-ROM Drive.

∙Select Install Utility from the following pop-up screen. The installation program starts automatically.

∙If the CD does not start up automatically, browse your CD-ROM

drive and double click the Setup.exe file (CDRom:\Utility\setup.exe).

∙Follow the on-screen instructions to install the utility.

∙Upon completion, you can start to manage your DiskMaster with

the NAS Utility.

If you are using the default installation directory, locate the NAS Utility as described below:

∙Windows Vista users: Go to Start > All Programs > NAS Utility > NAS Utility.

∙Windows XP users: Go to Start > Programs > NAS Utility > NAS Utility.

1.11Formatting the installed hard disks

If the hard disks are being installed for the first time, you need to initialize the disks before you can use them. Follow the steps described below.

To launch the NAS Utility, double click the NAS Utility icon () from your desktop or the program entry in the Start menu. If you are using the default installation directory, locate the NAS Utility as described below:

∙Windows Vista users: Go to Start > All Programs > NAS Utility > NAS Utility.

∙Windows XP users: Go to Start > Programs > NAS Utility > NAS

Utility.

If the hard disks are being installed for the first time, you need to initialize the disks before you can use them. Follow the steps described below.

DiskMaster

43