ENGLISH

Select the format mode ((Individual Disks , RAID0, RAID1 or JBOD) and Format type(EXT2, EXT3) from the drop-down menus. The available options are listed as below. After making your selection, click Next to continue.

A new message pops up to make you aware of the data loss resulting in this action. Click OK to continue. The system starts to format the hard disks. When the format is complete, click Finish.

If only one drive is installed, the RAID configuration will not be available.

Creating the RAID system will take several hours, depending on HDD capacity. Do not turn off the power or interrupt the system in any other way during this process! We recommend using the EXT2 file system for optimum performance and functionality. Changing the RAID setup will require you to re-format the drives. Make sure you backup all data before doing so!

DiskMaster

44