Owner’s Manual | DSP8807 | Digital Processor | |
and Amplifier | |||
|
| ||
|
|
|
AC POWER INPUT (120VAC @ 60Hz or 240VAC @ 50Hz)
As noted in the ‘important notices’ section the DSP8807 utilizes a UL recognized IEC AC power plug and cord (provided with the unit) which must not be changed or defeated. Please follow these important instructions. Failure to do so will void the product warranties.
The Mains Plug is the main disconnect device for the product, and shall be located so as to be readily accessible.
NOTE: Once the AC power is switched ‘ON’ it will take approximately ‘30’ seconds to initialize and start up.
•Do not defeat the safety purpose of polarized, keyed or grounding type connectors. A polarized plug has two (or multiple) contacts with one wider or longer than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prongs are provided for your safety. Do not defeat or change these. If the provided IEC power plug does not fit into your outlet, consult an electrician or your local authority having jurisdiction to replace the outlet to ensure meeting local building codes while assuring proper connection.
•Protect the power cord from being walked on or pinched particularly at the plug, receptacle outlet, and the exit point of the unit.
AC cable with IEC plug provided. All
wiring to meet NEC/ UL code
AC POWER IN
Replace AC Fuse with UL recognized 2A @ 250VAC or 5A @ 110VAC
Typical view of UL rated Fuse
120VAC
Power
Fuse
120V operation: T 8A L 250V
240V operation: T 5A L 250V
AMBIENT SENSING MICROPHONE (ALM-1) TERMINATION
Typical Ceiling Grid Installation
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 11 – | AtlasSound.com |
Specifications are subject to change without notice.
