'& ! '&
AT-HD88M-R
5 6 7
1.+5V DC: spare power jack for over 60m transmission when the receiver AT-HD88M-R may need external power to work*
2.A/V SIGNAL: connect a solid Cat-5/5e/6 cable between the respective A/V SIGNAL ports on the AT- HD88M-S & AT-HD88M-R
3.CHANNEL CONTROL: connect a solid Cat-5/5e/6 cable between the respective CHANNEL CONTROL ports on the AT-HD88M-S & AT-HD88M-R
4.INPUT CHANNEL: LED display to show the currently selected HDMI input source
5.INPUT SELECT: push-in button for switching input sources in sequential order
6.Signal Level 0-7: adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance. It is recommended to switch from 7 to 0 to find the optimal visual experience.
7.HDMI OUTPUT: connect to HDTV with a HDMI cable
8.IR RECEIVER: plug in the IR receiver
*The AT-HD88M-R has been tested extensively and found that it doesn’t require external power supply. If in rare situation you find it cannot work with the AT-HD88M-S, please use any +5V power adapter to plug in the power jack and see if it can work. If not, please contact your technical support for further service.
6
