AT-HD88M-S as master unit, AT-HD88M-R as receiver unit

+ &!!&

AT-HD88M-S as master unit

1.Connect all sources to HDMI Inputs on the 8x8 HDMI over CAT5 matrix master AT-HD88M-S

2.Connect each CHANNEL CONTROL output port on the AT-HD88M-S to respective CHANNEL CONTROL port on the remote receiver AT-HD88M-R

3.Connect each A/V SIGNAL output port on the AT-HD88M-S to respective A/V SIGNAL input on the remote receiver AT-HD88M-R

4.Connect IR blaster to the IR MAIN jack of AT-HD88M-S and direct the IR blaster to the built-in IR receiver of the sources

5.Connect the UL AC C13 power cord to the AT-HD88M-S

6.Power on all HDMI sources

7.Power on the AT-HD88M-S

1.Connect each HDMI output to HDMI displays

2.Connect the A/V SIGNAL port on the AT-HD88M-R to the A/V SIGNAL port on the AT-HD88M-S

3.Connect the CHANNEL CONTROL port on the AT-HD88M-R to the CHANNEL CONTROL port on the AT-HD88M-S

4.Connect IR receiver and place the IR receiver at the appropriate position that can receive the IR command signals sent from the users

5.Dial the 8-level rotary control switch to adjust the HDMI signal level until the picture and sound are clear

'%& *

Performance rating				Type of LAN cable
Wiring		Shielding	CAT5	CAT5e	CAT6
Solid		Unshielded (UTP)

		Shielded (STP)
		Shielded (STP)

Stranded		Unshielded (UTP)

		Shielded (STP)
		Shielded (STP)

	Termination		Please use EIA/TIA-568-Btermination (T568B) at any time
			11