2. Rear Panel
|
|
|
| 11 |
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
1. | IR extension. | 7. | Input ports 1 to 4. |
2. | RS485 port. | 8. | Power input. |
3. | LAN port. | 9. | Output 5 and 8 with HDMI and CAT5E. |
4. | IR emitter, corresponding to the Input port from 1 to 8 | 10. Input ports 5 to 8. | |
5. | RS232 port. | 11. DIP switch setting. | |
6. | Output 1 to 4 with HDMI and CAT5E. |
|
|
Note: The TCP/IP port has to be connected to the computer via direct Crosswire CAT5/6/7 wire while if connected to the router it needs to be connected though Straight wire.
HDMI Receiver (8 x Receivers included)
Power Input
HDMI Out | IR Input RX | RJ45 Inputs |
RJ45 inputs – please be careful when connecting RJ45 # 1 and # 2 inputs. They absolutely have to match the outputs on the switch. Output # 1 should be connected to Input # 1 and Output # 2 should be connected to Inputs # 2.
www.atlona.com toll free: |
| |
5 | ||
For International: | ||
|