![](/images/new-backgrounds/1119832/11983217x1.webp)
RS-232 PROTOCOL COMMANDS
Baud Rate : 9600 bps, Data Bit :8 bits, Parity : None, Stop Bit :1 bit
•Each command is terminated with a Carriage Return
•Each feedback is terminated with a Carriage Return
•Code entry is CASE SENSITIVE.
•Do not insert spaces between letter/number code entries.
Note1: Feedback for a command repeats the original command.
Example, if x1$ is a command, the feedback is the same and if the command is x2$, the feedback would also be x2$.
Note2: If command fails, the feedback should be “Command FAILED”.
Toll free: | 8 | www.atlona.com |
Local: |