Atmel AT89STK-06 Introduction, Features, Section, Notes:

Section 1

Introduction

This document describes the board included in the AT89STK-06 Starter Kit dedicated to the T89C51CC01/CC02 and AT89C51CC03 CAN microcontrollers (for T89C51CC02 optionnal adaptor is required). This board is designed to allow an easy evaluation of the product using demonstration software.

The AT89STK-06 Starter Kit can be used with the AT89C51AC3, TR89C51AC2, and T89C5115 Flash Microcontrollers with ADC (for T89C5115 optional adapter is required).

1.1	Features	•	CAN
			– On board CAN transceiver Atmel ATA6660
			– D-sub Connector Compliant to the CiA (User Group: "CAN in Automation")
		•	Recommendation for the CAN High Speed Bus
			Two Different Sockets to Support AT89C51CC03 and AT89C51AC3 in PLCC52 and all
		•	controllers in PLCC44 Packages
			Support of the T89C51CC02 & T89C5115 Microcontroller Requires the use of a PLCC28
		•	Adapter (CANADAPT28).
			The Board Comes with a AT89C51CC03-UA (PLCC44 package) and a AT89C51CC03-CA
		•	(PLCC52 package) Samples(1).
			Analog-to-Digital Converter
			– Potentiometer
			– Thermal Resistor
		•	– On board ADC Reference Voltage
			On-board Reset, INT0, INT1, LEDs, EA, ISP and Programming Interface
		•	Power, ALE, RS232 Rx and Tx LEDs
		•	CAN, SPI and RS232 Hardware Connectors
		•	On-board Voltage Regulator
		•	Voltage Operation: 8V to 15V
		• Operating Temperature Range: 0 to +70°C
		•	Dimension: 80 mm x 100 mm

Notes: 1. Samples for AT89C51AC3, T89C51CC01, T89C51AC2, T89C51CC02, and

T89C5115 can be ordered separately

AT89STK-06 Demo Board Software Demonstration Guide 1-1

Rev. 4339C–CAN–07/05