Using the ATAVRAUTO100
ATAVRAUTO100 User Guide 2-12
7697B–AUTO–09/07
Figure 2-8. Programming the ATAVRAUTO100 using ATAVRAUTO900
2.5.3 Programming with AVR JTAGICE mkII
The AT90C AN128can be preogrammed using spec ific JTAG link: 3-wire debug-wire
interface. To use the AVR JTAGICE mkII with an ATAVRAUTO100 an optional adaptor
should be used. Then th e JTAG probe can be conne cted to the ATAVRAUTO100 a s
shown in the following figure.
Figure 2-9. JTAGICEmkII probe connecting through debugWIRE interface.