ATN manual J. Mounting 3x or 5X Lens to the ATN NVM-14, Attaching ATN NVM-14 to PVS-7 Headmount

With this adapter you may see through the eyepiece using either right or left eye. To change the viewing eye, loosen the nut(C) and turn the adapter(D) in the point of connection to match with another eye. Tighten the nut(C) anew. To disconnect the adapt- er press the upper clip(E).

2.Align the headmount adapter and the head/helmet mount. Slide the monocular rearwards until the alignment boss aligns with the alignment groove on the head/helmet mount. Push until the monocular locks into the head/helmet mount.

Figure 3-8

Attaching ATN NVM-14 to PVS-7 Headmount

J. Mounting 3x or 5X Lens to the ATN NVM-14

Screw the 3x or 5x Lens into the threading of the front lens of the monocular.

Figure 3-9

Mounting 3x and 5x Lens to the ATN NVM-14

K. Mounting 3x or 5X Lens (ITT) to the ATN NVM-14

Screw Lens Adapter into the front lens of the monocular. Then screw the 3x or 5x IIT Afocal Lens into the threading of the Lens Adapter.