ATN Aries 390 manual Application, Features, Preparation for Operation

APPLICATION

Our new Aries 390 “Paladin” is the best 1st generation scope on the market.

We started by improving the optical configu- rations with lowered F-stop factors (from 1.7 on previous models to 1.4(!) on new) and optical resolution that is beyond current military standards (old 45lp/mm and the new is 60lp/mm). This provides you with the brightest and clearest image in a 1st gen unit. Then we added our precision “red on green” aiming system, easy push button operation, reticle brightness adjustment and our new detachable, most powerful in the industry 450mw Infrared Illuminator with dedicated windage and elevation adjustments.

Do you want the best NVD weapon sight on the market? If so then our new Aries 6900/7900/8900 “Crusader” is for you. It doesn’t get any better then the Crusader when it comes to performance. For the Cru- sader we use a top of the line “Prime Select” light intensifier tube for added light gain and resolution. Combine this select tube with 5x magnification and a super fast F:1.4 lens the image that you will get out of your Crusader is unbelievable.

The best optics, tubes and 3 year warranty makes the Aries 6900/7900/8900 Crusader one of the best Night Vision weapon sights there is!

FEATURES

ARIES 390 “PALADIN”

•Top-of-the-line First Generation weapon sight

•New, high resolution Gen. 1+ LIT.

•“Red on Green” reticle system with 1/8 inch @ 100yards adjustment

•4X magnification with new F:1.4, f90mm lens

•New, detachable most powerful in the industry 450mWt Infrared Illuminator with dedicated windage and elevation adjust- ments.

•New Titanium mounting system

•Dimensions: 12”x4”x2.8”

•Weight: 2.8 lbs.

ARIES 6900/7900/8900 “CRUSADER”

•Top-notch performance with pro-oriented design

•5X magnification, F:1.4, f90mm lens

•“Red on Green” reticle system with 1/8 inch @ 100yards adjustment

•New Titanium mounting system

•Prime Select US 2nd Gen. (6900), Prime Select US 3rd Gen. (7900) or 4th Gen.(8900) tubes used

•Automatic brightness control(ABC) for tube protection

•Dimensions: 12”x4”x3”

•Weight: 2.8 lbs.

•Made in USA

PREPARATION FOR OPERATION

Before getting started make sure to follow these steps:

•Install the battery into its housing with the polarity order shown on the main body of the unit.

•Switch on the Aries scope with the protec- tive tens cover still attached to the tens.

•Make sure that the green luminance of the light intensifier tube is present.

•Observe the scene, and adjust the diopter and/or lens for optimal image clarity.

•You may now enter a dark environment or simply shut the lights off in order to darken the room.

•Next, remove the lens cap/daylight filter.

•Observe the scene, and adjust the front lens for ideal focus.

•Finally, you may want to turn the infra red (IR) illuminator on. Notice the ability of the Aries scope to see in total darkness with the aid of the IR illuminator.

Battery installation

2