ATTO Technology FC 3300, FC 3305 ATTO ExpressPCI provides Fibre Channel solutions, ExpressPCI FC

1 ATTO ExpressPCI provides Fibre Channel solutions

All ATTO ExpressPCI FC models have been designed to ensure interoperability with Fibre Channel devices and compatibility with a broad range of servers and workstations to meet your needs.

The ATTO ExpressPCI FC 3300 and ExpressPCI FC 3305 host adapters offer high performance for your applications. Each conforms to a strict interpretation of Fibre Channel specifications to ensure the adapter will work with a variety of other SAN (Storage Area Network) components.

ExpressPCI FC 3300

The ExpressPCI FC 3300 is a 2-Gigabit Fibre Channel to PCI-X bus host adapter with one fixed short wave optical LC connector.

It supports all Fibre Channel topologies, including point-to-point, arbitrated loop and fabric.

This adapter is capable of automatically sensing and switching between 1-Gigabit and 2-Gigabit speeds, allowing you to install the product in legacy SANs.

Express PCI FC 3305

The ExpressPCI FC 3305 is comparable to the ExpressPCI FC 3300 host adapter with the exception of the interconnect style.

It is a 2-Gigabit Fibre Channel to PCI-X bus host adapter with a fixed, shrouded copper HSSDC interface capable of supporting all Fibre Channel topologies, including point-to-point, arbitrated loop and fabric.

This adapter is capable of sensing and switching between 1-Gigabit and 2-Gigabit speeds, allowing you to install the product in legacy SANs.

Common features

❖2.125 Gigabit data transfer rates providing up to 400 MB/sec. throughput in full duplex mode

❖Strict adherence to ANSI FC-AL-2, FC- PLDA, FC-Tape and FC-FLA specifications

❖Supports point to point, arbitrated loop and direct fabric/switch attach topologies

❖Class 2, Class 3 and Intermix support. ❖ASPI and SCSI Manager 4.3 compatible

❖Autonegotiate and set between 1-Gigabit and 2-Gigabit speeds

❖Multiple initiator support

❖LEDs for online and fault status

❖Windows® XP/2000/NT; Windows 95/98, Linux, Sun® Solaris and Macintosh® OS, Mac OS X

❖RAID kits available

❖SNIA Fibre Channel host adapter API support

Advanced SCSI support

❖Supports Advanced Data Streaming (ADSTM) Technology

❖Supports SCSI-FCP over Fibre Channel ❖Uses SCSI-3 tagged command queuing ❖Large command FIFO

❖Supports disconnect/reconnect ❖Asynchronous I/O support ❖Bootable from attached disks

PCI features

❖PCI 2.2 and PCI 99 compliant

❖PCI BusMaster rate of 528 MB/sec. in 64- bit/66 MHz PCI slots

❖66MHz/64-bit PCI compatible. Backward compatible to 33MHz and 32-bit PCI

Dimensions ❖Length: 6.521 inches ❖Height: 4.2 inches

Environmental & physical specifications

❖Operating temperature: 0-50oC ❖Humidity:10-90% non-condensing ❖Airflow: 100 LFM (min.)

PCI Signal Compatibility

❖3.3 Volts/5 Volts universal

Power Requirements

❖1A @ 5V

1ATTO Technology ExpressPCI FC 3300 and FC 3305 Installation and Operation Manual