Audio2000's AKJ780E manual Basic Connections

Basic Connections

3.¼ INCH PRE-Out Connections:

●Connect one end of the ¼ inch audio cables to the left and right PRE-OUT jacks on the AKJ780E. ●Connect one end of the ¼ inch audio cables to the left and right AUDIO/LINE/AUX INPUT jacks on the external device.

PRE-OUT

5.CONNECTING EFFECTS USING THE EFFECT INSERT:

1.Connect one end of the ¼ inch stereo audio cables to the GUITAR EFFECT, KEYBOARD EFFECT, or MIC EFFECT inserts on the rear panel of the AKJ780E.

2.Connect the other end of the ¼ inch stereo audio cables to the sound effect device.

3.By using the built-in EFFECT INSERT you can add external effects to vocals and/or guitar or keyboard or microphone without compromising the quality of the original signal.

The effect insert is a break point in the input channel signal path, It allows the signal to be taken out from this AKJ780E, through an external equipment such as a Limiter,Compressor,Equalizer, Effector,and then back to the AKJ780E,the input jack can be used with ¼ inch phone jack,the signal will be sent out through TIP of the ¼ inch phone jack and back to the AKJ780E through RING of the ¼ inch phone jack.

13