15
SYMPTOM | Power led off |
CAUSE | No sound |
REMEDY | Power cord incorrectly inserted and/or amplifier switched off |
| Check that cord is inserted both in the integrated amplifier and in the mains wall socket |
| and that the switch is in the 'ON' position |
CAUSE | Fuse burnt out |
REMEDY | Check the fuse in the fuse holder (unplug cord from mains first!!) next to the IEC socket |
| and eventually replace with same type |
| Power led glows red |
SYMPTOM | No sound |
CAUSE | Volume knob turned completely anticlockwise (standby on) |
REMEDY | Turn volume knob up |
SYMPTOM | Power led flashing red an no sound |
CAUSE | Speaker protection circuit active |
REMEDY | Check for shortcircuit on speakers connections. If the problem still exists, consult an |
| Audio Analogue technician or dealer |
SYMPTOM | Power led green and no sound |
CAUSE | Source not correctly selected |
REMEDY | Choose the correct position on the selector |
CAUSE | Speaker cables not correctly connected or faulty |
REMEDY | Check and connect speaker cables properly |
CAUSE | Source not connected or faulty signal cables |
REMEDY | Check and connect signal cables |
| If the suggestions do not work, or your problem isn't in the list, please contact |
| your Audio Analogue dealer |
