6
Front panel
1) STANDBY, STOP/OPEN. Multifunctional button. When in play mode, by pressing this button disc playback is stopped; when in
stop mode, by pressing this button disc tray is opened/closed. This button is active only when the CD player is selected as
sound source.
2) PREV/REW. By pressing this button during playback, you move to the previous CD track or, holding it down for a few se conds,
activate fast rewind search. When playback is stopped, you may choose the CD track from which resuming playback or search
CD tracks backward. This button is active only when the CD player is selected as sound source.
3) NEXT/FFW. By pressing this but ton during playback, you move to the next CD track or, holding it down for a few seconds,
activate fast forward search. When playback is stopped, you may choose the CD track from which resuming playback or search
CD tracks forward. This button is active only when the CD player is selected as sound source.
4) PLAY/PAUSE. By pressing this button, you start CD playback or pause/resume CD playba ck. This button is active only when
the CD player is selected as sound source.
5) VOLUME KNOB. The volume knob doesn’t operate on a potentiometer. It turns clockwise or anti-clockwise for a few degrees
and goes back to the initial p osition when released. Do not force knob rotation beyond the limit of the mechanism. A slight
clockwise rotation increase volume, a slight anti-clockwise rotation decrease volume. Volume level (0-51) is shown on the
display under the “Level” signal.
6) SEARCH+. When this button is pressed and immediately released, the frequency level is increase d by one step (SEARCH
function). When held for one second, the freque ncy level is increased until a higher-frequency radio station is reached (SCAN
function): if this is not possible, the whole bandwidth is scanned forward until the initial frequency level is reached. This button is
active only when the radio tuner is selected as sound source.
7) MEMORY+. By pressing this button when the unit is in normal mode, the radio is tuned on the station stored in the memory
allocation that follows the last selected allocation. When the unit exits the Standby mode and when changing modulation type,
pressing this button tunes the radio on the station stored in the 1st memory allocation. Pressing th e button again tunes the radio
on the station n° 2, 3,…, 18 then ba ck to n° 1. If no radio station is stored into the selected allocation, an EMPTY signal shows
on the display and the radio switches back to t he previous station. When in “Storage” mode, pressing this button allows
choosing the memory allocation where to store the selected radio station. Please refer to “Radio stations storage” paragraph for
further details about storage procedure. Please refer to “Stored Radio stations tuning” paragraph f or further details about radio
stations tuning. This button is active only when the radio tuner is selected as sound source.
8) FM/AM. Pressing this button changes modulation type. It is possible to switch between AM and FM. This button is active only
when the radio tuner is selected as sound source.
9) MONO. Pressing this button forces the unit to monophonic playback. When this option is enabled, the STEREO LED turns red.
To return to normal mode, just press this button once. When the unit is in stereophonic mode, the STEREO LED turns green
when the incoming signal is stereophonic, otherwise it stays off. This button is active only when the radio tuner is selected as
sound source.
10) SEARCH-. When this button is pressed and immediately released, the frequency level is decreased by one step (SEARCH
function). When pressed and rele ased after one second, the frequency level is decr eased until a lower-frequency radio station