AudioControl DQX manual Para EQ1 Freq=3.15k Width=1/6 LVL=+12dB

AudioControl®

MODE: Para EQ1 and Para EQ2

Para EQ1	Freq=3.15k
Width=1/6	LVL=+12dB
Figure 8: Para EQ1 screen
Para EQ2	Freq=3.15k
Width=4 oct	LVL=0dB
Figure 9: Para EQ2 screen

Besides having a 30-band graphic equalizer, your DQX also has two fully-programmable parametric bands. These allow you to select a frequency, apply boost or cut, and change the bandwidth or “Q” of the filter.

Para EQ1 mode allows you set the controls for one of the parametric bands.

Para EQ2 mode lets you change the settings for the second parametric bands.

Freq(uency): This corner of the screen indicates which frequency you are boosting or cutting. If you wish to select another frequency, tap the left or right arrow buttons until the cursor is flashing on the number next to “Freq=”. Then use the “+” and “-” controls to select the frequency to which you wish to apply boost or cut.

Lvl: When the cursor highlights this part of the screen, you can now apply boost or cut to both channels using the “+” and “-” controls. Please note that you do not have individual channel control using the parametric equalizers.

Width: This control lets you select how wide of an area each of the DQX’s parametric bands affects. You can choose a real narrow bandwidth, like 1⁄12th of an octave or go as wide as three full octaves.

14 Owner’s Enjoyment Manual