One-Touch Emergency Call
Dials an emergency number with a single key stroke, even in the “Phone Lock” or “Restrict” mode and can be turned off to prevent unintentional calls to the emer- gency number.
See Turning On/Off
1.Press and hold 1 for more than 2 seconds. The number in emergency memory location “1” will be dialed.
2.Then the 
indicator will be displayed and the call will be placed. (The factory preset number is
“911”.)
Note: This feature cannot be used if the Keypad Lock is on.
You need to dial all the digits and 
.
Emergency Call Mode
When one of the 3 preprogrammed emergency num- bers is dialed the phone enters Emergency Call Mode and will attempt to complete the emergency call using any available cellular system it can find. After the call is placed, the phone will stay in the Emergency Call Mode, and attempt to continue to receive service from the cellular system used to complete the call. “Emer- gency Call Mode, END to exit” will display and the phone will automatically exit the Emergency Call Mode
after 5 minutes or after you press 
.
Receiving Calls
The phone sounds an alert or vibrates to alert you of an incoming call. Also, the LED on the top of the phone will flash.
Receiving a Call
Press 
to answer the call. The 
indicator will be displayed.
Note: To mute the ringer or stop the vibrating, press 
.
Any Key Answering
This feature permits you to answer an incoming call by
pressing any key on the key pad except 
and 
Rcl F
.
27
