Installation Instructions

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with

your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at

1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Remove the detachable front panel if it is attached to the chassis by pushing the “Release” button. Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, re- check all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trimpanel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION : DO NOT EXCEED M5 X 8 MM MAXIMUM SCREW SIZE.

LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

AAAAAV-427V-427V-427V-427V-427 specifications

The Audiovox AAAAAV-427V-427V-427V-427V-427 is a cutting-edge audio device designed to elevate your listening experience through innovative technology and superior sound quality. This versatile product combines modern aesthetics with advanced audio performance, making it an excellent choice for audiophiles and casual listeners alike.

One of the standout features of the AAAAAV-427V is its robust sound technology. It utilizes a high-fidelity audio system that delivers crystal-clear sound across a wide frequency range. Users can enjoy deep, booming bass alongside crisp mids and clear highs, allowing for a full range of sound that makes music, movies, and games come to life.

The unit is equipped with Bluetooth connectivity, enabling seamless wireless streaming. This feature allows users to connect their smartphones, tablets, or computers effortlessly. The AAAAAV-427V supports various audio codecs, ensuring high-quality streaming without compromise. Additionally, it offers a stable connection, which minimizes dropouts and ensures a consistently enjoyable listening experience.

Another impressive characteristic of the AAAAAV-427V is its ergonomic design. The product is built with user-friendliness in mind, featuring intuitive controls that make navigation simple. Users can easily adjust volume, switch tracks, and toggle playback modes, all with a straightforward layout that prioritizes convenience.

For those who enjoy personalized sound experiences, the device features customizable equalizer settings. With these settings, users can tailor the audio output to match their preferences, enhancing their enjoyment of different genres of music or audio content.

Durability is another hallmark of the Audiovox AAAAAV-427V. Constructed from high-quality materials, it is designed to withstand the rigors of daily use. Its sleek exterior not only looks stylish but also protects internal components from wear and tear.

In summary, the Audiovox AAAAAV-427V-427V-427V-427V-427 stands out as a premier audio solution that combines advanced sound technology, wireless connectivity, ergonomic design, customizable audio settings, and durable construction. Whether you are a music lover, a movie enthusiast, or simply someone who appreciates quality audio, this device offers an exceptional listening experience that you won't want to miss. Embrace the future of sound with the Audiovox AAAAAV-427V.

Audiovox AAAAAV-427V-427V-427V-427V-427 owner manual Installation Instructions

Models: AAAAAV-427V-427V-427V-427V-427