Audiovox ACC56M Procedure For Horizontal Installation, Procedure For Vertical Installation

PROCEDURE FOR HORIZONTAL INSTALLATION

⃞Attach bracket (L) and bracket (R) to each side of the unit,using the hexagonal bolts with washer base (M5 x 10).

PROCEDURE FOR VERTICAL INSTALLATION

NOTE: If the anti-vibration spring position has been changed and verified for vertical mounting (as shown on page 6), start with step 2.

Anti-vibration springs position

Bracket (L)

NOTE: Use seals (A) to cover unused	Bracket (R)
	Hexagonal bolt
mounting holes on sides of unit.	with washer base (M5 x 10)

⃞Determine the mounting location, and drill four mounting holes.

Never mount the unit near the fuel tank.

Drill holes 4mm in diameter.
⃞ Secure the unit in place,using four self-tapping	Self-tapping screw
screws(T5x12).	(T5 x 12)

Use RTV(sillicone sealer)on screw threads or around the holes to prevent moisture intrusion.

Bracket (L)

Bracket (R)

⃞Set the 4 anti-vibration springs to position “v”

position “v”

⃞Determine the mounting location, and drill four mounting holes.

Drill holes 4mm in diameter.

⃞Attach bracket (L) and bracket (R) to each side of the unit, using the hexagonal bolts with washer base (M5 x 10).

NOTE: Use seals(A) to cover unused mounting holes on sides of unit.

Bracket (L)

Bracket (R)

Hexagonal bolt with washer base (M5 x 10)

⃞Mount the unit in place, using four self-tapping screws (T5 x 12). Use RTV(silicone sealer) on screw threads or around the holes to prevent moisture intrusion.

Self-tapping screw (T5 x 12)

Bracket (L)

Bracket (R)

6 7