adjust the treble response as desired. The treble level will be shown on the display panel from a minimum of TRB--10to a maximum of TRB 10 (TRB 00 represents flat response). The display will automatically return to the nor- mal indication 5 seconds after the last ad- justment or when another function is activated. Adjusting the treble level will automatically return the equalizer setting to the FLAT mode from its previous setting.

6LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance mode by pressing the SEL button 3 so that the BAL indication appears on the display panel. Within 5 seconds of choosing the Balance mode, press the VOL + or VOL - button 2 to adjust the bal- ance as desired. The balance position will be shown on the display panel from BAL 10L (full left) through BAL 10R (full right). When the volume level between the left and right speak- ers is equal, BAL L=R will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

7FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select the Fader mode by pressing the SEL button 3 so that the FAD indication appears on the display panel. Within 5 seconds of choosing the Fader mode, press the VOL + or VOL - button 2 to adjust the front-rear speaker balance as desired. The fader position will be shown on the display panel from FAD 10R (full rear) through FAD 10F (full front). When the level between the front and rear speakers is equal, FAD F=R will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is acti- vated.

8LOCAL (LOC) OPERATION

This feature is used to select the strength of the signals at which the radio will stop during Automatic Seek Tuning. Pressing the button will select the Local setting (LOCAL will appear on the display panel for 5 seconds and LOC will remain in the center of the display) and only strong (local) stations will be received. Pressing and holding the button again will select the Distant setting (Dx will appear on the display panel for 5 seconds) and the radio will stop at a wider range of signals, including weaker (more distant) stations.

9AUDIO MUTE (MUTE)

This button is used to mute the volume from the system. By pressing the button, a flash- ing MUTE indication will appear on the dis- play panel and the volume will be muted. Pressing the Mute button again, or activating any other function of the unit will return the vol- ume level to the setting in use before the Mute function was activated.

bl BAND/LOUDNESS CONTOUR SELECTION (BAND/LOUD)

During radio operation, each momentary press of this button will change the radio band. The indication AM, F1, F2, or F3 will appear on the display panel according to your selection. When listening to music at low volume levels, the loud feature will boost the bass and treble ranges to compensate for the char- acteristics of human hearing. Press the BAND/LOUD button for at least 2 seconds to activate this feature as indicated by a beep tone and LOUD ON appearing on the display panel for about 5 seconds. (LOUD re- mains on the display.) Pressing the but- ton again for 2 seconds will sound a beep tone and LOUD OFF will appear on the dis- play for about 5 seconds.

OPERATING INSTRUCTIONS

7

128-6691

7 of 16

Page 7
Image 7
Audiovox ACD-27 manual LEFT/RIGHT Balance Control, FRONT/REAR Fader Control, Local LOC Operation, Audio Mute Mute