Audiovox ACD83 owner manual CD Changer Error Codes, Or Codes, Du DISC/TRACK Repeat Play RPT

du DISC/TRACK REPEAT PLAY (RPT)

When the RPT button is pressed, the RPT indication will appear on the display panel and play of the selected track will be continually repeated until the Track Repeat mode is canceled by pressing the RPT button again or by activating the Scan or Shuffle Play functions.

When the RPT button is pressed and held for more than 2 seconds, the DRT indication will appear on the display panel and play of the selected disc will be continually repeated until the Disc Repeat mode is canceled by pressing the RPT button again or by activating the Scan or Shuffle Play functions.

el DISC/TRACK SHUFFLE PLAY (SHF)

When the SHF button is pressed, the SHF indication will appear on the display panel

and the tracks on the disc will be played in a random, shuffled order. The Track Select button will also select tracks in the shuffled order instead of the normal progression. The Shuffle Track mode can be canceled by pressing the SHF button again or by activating the Scan or Repeat Play functions.

When the SHF button is pressed and held for at least 2 seconds, the DSF indication will appear on the display panel and the discs in the magazine will be played in a random, shuffled order, as well as the tracks on each disc. After playing the tracks at random from a disc in the magazine, the unit will select another disc at random and play all the tracks on it in a random shuffled order. This will continue from disc-to-disc until the Shuffle Disc mode is canceled by pressing the SHF button again or by activating the Scan or Repeat Play functions.

CD CHANGER CONTROLS / CD CHANGER ERR

CD CHANGER ERROR CODES

If a problem should develop while operating the CD changer, the following error codes may appear on the display panel.

ER-1:Indicates that there is no magazine loaded in the CD changer.

ER-2:Indicates a problem with the magazine eject function.

ER-3:Indicates an error in the disc loading function.

ER-4:Indicates an error in the disc un-loading function.

ER-5:Indicates an error in the magazine position.

ER-6:Indicates an error in the laser pick-up position.

ER-7:Indicates an error in the laser focus on the disc.

In any of the above situations, try ejecting the CD magazine from the changer and make sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual of the CD changer). Re-load the magazine and check for proper operation. You may also try activating the RESET button dm on the unit, but this will also erase the time and pre-set memories.

If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.

OR CODES

14

128-6003A

15 of 20