OPERATING INSTRUCTIONS
|
|
|
|
|
|
|
|
|
| 19, 27, 30, 31 | |
32 | 2 |
|
| 16,17,33 |
| 11, 20, 21, 36, 37 (BEHIND PANEL) | |||||
|
|
|
|
|
|
|
|
|
| 1 | |
OPEN |
|
|
|
|
|
| ILL | ||||
29 |
|
|
|
|
|
|
| PWR | |||
| CLAS |
|
|
|
| Sub. W |
| Tune | 13 | ||
EQ |
|
|
|
|
|
|
|
| MONO | ||
| POP |
|
|
|
|
|
|
| |||
|
| JAZZ |
|
|
|
|
|
|
| /Seek |
|
T/F |
| LOC | MONO |
|
|
| AF TA | EON |
| /Track | AS/PS |
| REG | ST |
|
|
| TP PTY |
|
| |||
|
|
|
|
|
|
|
| ||||
|
| LOUD |
|
|
|
| ME/CR |
|
|
| |
28 |
|
| POWER LEVEL METER |
|
| 14 | |||||
|
|
|
|
|
|
|
|
|
|
| |
| MUTE | SCAN | LOC |
|
|
|
|
|
|
| BAND |
SEL |
|
|
| 1PAU | 2SCN | 3RPT | 4SHF 5D.DN | 6D.UP | MODE | ||
|
|
| LOUD | ||||||||
9 | 28 | 12 | 22 | 23 | 24 | 25 | 26 |
| 18 | 8,10 | |
3, 4, 5, 6, 7 |
|
|
|
| 38 | 39 | 40 | 35 |
| 34 |
|
|
|
|
|
| 15 |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
5
1POWER/ILL BUTTON ( PWR )
Press this button to turn the unit on or off. If the ignition switch is “on”,the unit will also turn on automatically when a compact disc is inserted, or if any other button is pressed. When the radio is on, each time the button is momentarily pressed and released, the VFD display panel
2AUDIO CONTROL ( 
/ 
) SELECT
To increase the volume level, press the 
button. The volume will increase and the level will shown on the display panel from a mini- mum of VOL 00 to a maximum of VOL 100. To decrease the volume level, press the 
button. The display will automati- cally return to the normal indication 5 sec- onds after the last volume adjustment or when another function is activated. These control buttons are also used in conjunction with the Select (SEL) button 3 to adjust the bass, treble, balance and fader levels as described in 4, 5, 6 and 7.
3PUSH SELECT CONTROL (SEL)
This button is used to select the audio function (volume, bass, treble, balance, or fade) whose setting is adjusted using the AUDIO CONTROL buttons 2. Pressing the SEL button once will set the unit for volume adjustment (VOL on the display). Additional presses will set the unit for bass adjustment (BAS on the display panel), treble adjustment (TRB on the display), balance (BAL), or fader (FAD). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
NOTE: If the BAS or TRE functions are set while the Equalizer function cu is active, the Equalizer function will automatically revert to the FLAT setting.
4BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the SEL button 3 so the BAS indication appears on the display panel. Within 5 seconds of choosing the Bass mode, press the 
AUDIO CONTROL 2
6 of 20
