INSTALLATIONINSTRUCTIONS

1

INSTALLATIONINSTRUCTIONS

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at

1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Remove the detachable front panel if it is attached to the chassis by pushing the “Release” button. Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, re-check all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7. Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 8 MM MAXIMUM SCREW SIZE.

LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

128-5504

2 of 12

Page 2
Image 2
Audiovox AV-455 manual Installationinstructions

AV-455 specifications

The Audiovox AV-455 is an innovative portable multimedia player that combines cutting-edge technology with user-friendly features, making it a versatile choice for both entertainment and practicality. Launched as part of Audiovox’s commitment to high-quality audio and video solutions, the AV-455 stands out due to its sleek design and functionality.

One of the primary features of the AV-455 is its impressive screen. Equipped with a vibrant 7-inch LCD display, it ensures that users can enjoy their favorite movies, videos, and games in sharp detail. The screen’s resolution is optimized for clear visibility, enhancing the viewing experience whether indoors or outdoors.

The AV-455 supports multiple media formats, making it an adaptable device for various usage scenarios. It can play popular video formats such as MP4, AVI, and MKV, along with a wide range of audio files including MP3 and WAV. This versatility allows users to seamlessly switch between different media types without the hassle of converting files.

A significant highlight of the Audiovox AV-455 is its built-in Bluetooth technology. This feature enables users to connect easily to external devices, including headphones and speakers, minimizing the clutter of wires and enhancing convenience. The Bluetooth functionality pairs quickly and maintains a stable connection for an uninterrupted entertainment experience.

For those who like to take their media on the go, the AV-455 includes a built-in rechargeable battery that offers extended playtime. Users can enjoy hours of continuous use without needing to worry about finding an outlet, making it ideal for road trips or outdoor gatherings.

Additionally, the AV-455 incorporates an SD card slot and a USB port, providing users with the ability to expand storage and access additional content effortlessly. This means users can bring along their favorite playlists, movie collections, or family photos without needing to compromise on storage space.

The device also features an intuitive and responsive interface, ensuring that navigation through menus and settings is smooth and straightforward. This makes it accessible for users of all ages, whether tech-savvy or newcomers to digital media devices.

In summary, the Audiovox AV-455 is a standout portable multimedia player that combines a vibrant display, versatile media support, Bluetooth connectivity, and ample storage options in a sleek design. Its features cater to various entertainment needs, making it an excellent choice for anyone looking to enhance their audio and visual experience on the go.