OPERATINGINSTRUCTIONS
7
from the display panel). To return to stereo reception mode,pressthebuttonagainsothatthe“ST”indication appears on the display panel.
PRE-SET SCAN (PS)
Press this button momentarily to scan the stations
Pressing and holding the button for longer than 2 seconds will activate the
STATION PRE-SET MEMORIES
To set any of the 6
1. Turn the radio on and select the desired band.
2.
3. Press the
4. Repeattheaboveprocedurefortheremaining5pre- setsonthatband andfortheother4bandsontheunit.
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions.
NOTE:Itisa characteristic of LCD panels that, if subjected tocoldtemperaturesforanextended periodoftime,theymaytakelongertoilluminate thanundernormalconditions. Inaddition,the
visibilityofthenumbersontheLCDmayslightly decrease. The LCD
SPECTRUM ANALYZER DISPLAY
The Spectrum Analyzer Display feature incorporated in this unit breaks down the audio frequency spectrum into 5 bands and provides a visual indication of the amount of audio signal within each of these bands. The number of illuminated bars (1 to 10) shows the instantaneous signal level in the band around the indicated frequencies (105Hz., 340Hz., 1KHz.,
CASSETTE DOOR3.4KHz., and 10.5KHz.).
To access the cassette door, press the Front Panel Release button so that the panel drops to its lowered position. Hold the cassette with the exposed tape edge to the right and insert it fully into the cassette door until the cassette is engaged and begins playing (“TAPE” will appear on the display panel). When the cassette reaches the end on the sideofthetapebeingplayed,theunitwillautomatically change direction of play as shown by the arrow indications on the display panel.
NOTE:Observe cassette operation cautions in Care and Maintenance section of this manual.
& FAST-FORWARD/REWIND BUTTONS ( /)
These buttons cause the tape to move rapidly in the direction indicated by the arrows. For example, if the button is pushed when the tape is moving from left toright( on the display panel), the tape will fast- forward. If the button is pressed while the tape is moving from right to left ( on the display panel), the tape will rewind. To stop fast tape movement, lightly pushtheoppositebutton. Ifthetapeisallowedtofast- forward or rewind all the way to the end, play will
automatically begin again from that point.
PROGRAM SELECTOR
To manually reverse tape direction and play the other side (program) of the cassette, lightly push both the
EJECT BUTTON ( )
Tape playback is stopped and the cassette is ejected bypressingthisbuttonlocatedbehindthefrontpanel, nexttothetapedoor. Radiooperationwillautomatically
128-5504
8 of 12