![](/images/new-backgrounds/1262634/2626349x1.webp)
HEADREST COVER REPLACEMENT:
NOTE: If desired, replace the headrest cover before installing the headrest in the vehicle.
1.Using a Philips screwdriver, unscrew the two Philips screws and lift the bottom edge of the monitor upward.
Unscrew Philips Screws
2. Remove the velcro tabs securing the headrest cover.
Remove Velcro Tabs
3.Replace the headrest cover with the desired color and secure the headrest cover by
4.Place the monitor cable into the space on the right side of the headrest and lower the monitor into position to align the two Philips screws with the screw holes in the headrest. Close the screen and press the PUSH button to secure the screen.
Push
5.Tighten screws
Tighten Philips Screws
AVXMTGHR1D | 5 |