CD CHANGER CONTROLS
Built into this radio are controls to operate an optional
Adjustments of the audio functions (volume, tone, balance, and fader) operate in the same manner during CD changer play as they do for radio, CD, and cassette play. The following controls will operate the CD changer when it is installed and connected to this radio. Refer to the owner’s manual included with the CD changer for instructions on the installation and correct loading and use of the CD magazine.
dmMODESELECTOR(MODE)
With the CD changer connected to the unit, this button is used to select CD changer operation. To choose CD changer mode, press the button until the
“DISC”, “TRACK” and indications appear on the display panel. Press the Mode button again to change back to radio, CD player or tape operation.
dn & do DISC SELECT (DISC ) ( DISC)
These buttons are used to select the desired disc for play. To advance to a higher number disc, press the “DISC " button dn. To return to a lower number disc, press the “ DISC ” button do . The number of the disc in play will be shown on the display panel.
dp TRACK SELECT ( TRACK)
This button is used to quickly select the beginning of a particular track. Tap the Forward Track Select () side of the button or Backward Track Select ( ) side of the button to locate the desired track as shown by the track number on the display panel.
dq CUE/REVIEW FUNCTIONS ( / )
When the Cue () side of the button is held down and the end of the last track on the disc is reached or the Review ( ) side of the button is held down until the beginning of the first track is reached, the unit will enter the Pause mode
( will flash on the display panel) until the button is released.
dr PAUSE SELECTOR ( )
Pressing this button will temporarily stop play of the disc (the indication will flash on the display panel). Press the button again to resume play of the disc from the point at which it had stopped. Pause mode will also be cancelled by activating any other disc changer function.