3.Press the
4.Repeat the above procedure to enter stations in the remaining 4
bo LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions.
NOTE: It is characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illuminate than under normal conditions and the visibility of the numbers may slightly decrease. The LCD read- out will return to normal when the temperature increases to a normal range.
bpCASSETTEDOOR
Hold the cassette with the exposed tape edge to the right and insert it into the cassette door. Depress fully until the cassette is engaged and begins playing.
When the cassette reaches the end of the side of the tape being played, the unit will automatically change direction as shown by the arrow indication on the display panel and play of the other side of the cassette will begin.
NOTE: Observe cassette Cautions in the Care and Maintenance section of this manual.
bq
Pushing the
br REWIND BUTTON (REW)
Pushing the Rewind button will cause the tape to move rapidly in the reverse direction of play (the direction arrow on the display panel will flash during this operation). To stop Rewind movement, lightly push the
bsPROGRAMSELECTOR
To manually reverse tape direction and play the other side (program) of the cassette, lightly push both the
bt TAPE PAUSE SELECTOR
Pressing this button will temporarily stop play of the tape (the indication will flash on the display panel). Press the button again to resume play of the tape from the point at which it had stopped.