CHARGING THE BATTERY

POWER CONNECTION

1.Plug the Travel Charger into a standard outlet.

2.Plug the other end of the Travel Charger into the bottom of your phone. The battery must be installed on to the phone.

CHARGINGCHARGING THETHE BABATTERTTERYY

NOTE: 1. It is more efficient to charge the battery with the handset powered off.

2.The battery must be connected to the phone in order to charge it.

3.Battery operating time gradually decreases over time.

4.If the battery fails to perform normally, you may need to replace the battery.

BATTERY CHARGING TIME

Charging...

MENU FIND

Charging is in progress

Charging is completed!

MENU FIND

Charging is completed

Battery Type

BTR - 8410

Charging Time

200 minutes

NOTE: Charging time applies only when your phone is turned off. Charging time may vary if your phone is turned on.

NOTE: 1. When you charge the battery with the phone power off, you will see a charging status screen. You cannot operate the phone until it is powered on.

2.The battery is not charged at the time of purchase.

3. Fully charge the battery before use.

4. If you use a data cable while you are charging the battery: After using the cable, disconnect the Travel Charger first, then the data cable.

BATTERY TALK & STANDBY TIMES

 

 

Standard Battery

 

 

(900mAh)

Talk Time

Digital

180

(min)

Analog

103

 

Standby

Digital

145

Time

Analog

16

(hrs)

NOTE: These times are for a new battery. Talk and standby time may decrease over time.

Page 14 - Chapter 1

Chapter 1 - Page 15

Page 9
Image 9
Audiovox CDM-8410 owner manual Charging the Battery, Power Connection, Battery Charging Time, Battery Talk & Standby Times