8410altel 2003.12.12 12:25 AM Page 16
CHARGING THE BATTERY
POWER CONNECTION
1.Plug the AC charger into a standard outlet.
2.Plug the other end of the AC charger into the bottom of your phone. The battery must be installed on to the phone.
Charging... | Charging is |
| Complete |
MENU | MENU |
Charging is | Charging is |
in progress | in complete |
NOTE: 1. When you charge the battery with the phone power off, you will see a charging status screen. You cannot operate the phone until it is powered on.
2. The battery is not charged at the time of purchase. 3. Fully charge the battery before use. 4. If you use a data cable while you are charging the battery: After using the cable, disconnect the AC charger
first, then the data cable.
CHARGING THE BATTERY
NOTE: 1. It is more efficient to charge the battery with the handset powered off.
2.The battery must be connected to the phone in order to charge it.
3.Battery operating time gradually decreases over time.
4.If the battery fails to perform normally, you may need to replace the battery.
BATTERY CHARGING TIME
Battery Type | BTR - 8410 |
|
|
Charging Time | 200 minutes |
|
|
NOTE: Charging time applies only when your phone is turned off. Charging time may vary if your phone is turned on.
BATTERY TALK & STANDBY TIMES
|
| Standard Battery |
|
| (900mAh) |
Talk Time | Digital | 180 |
(min) | Analog | 103 |
| ||
Standby | Digital | 145 |
Time | Analog | 16 |
(hrs) |
NOTE: These times are for a new battery.
Talk and standby time may decrease over time.
Page 14 - Chapter 1 | Chapter 1 - Page 15 |
