JVC GC-QX3 manual 14EN, 3 4 5 6, LCD Panel, Power Dial and Mode Display

14EN

CONTROLS,CONNECTORSANDINDICATORS(cont.)

LCD Panel

12

3 4 5 6 7

1Indicator of initial settings having been changed

This indicator is displayed if the initial settings have been changed.

2Mode display

Displays the current mode.

3Remaining battery power indicator

This bar graph gives a rough indication of how much battery power is remaining.

4Flash indicator ............................ ☞ pg. 33 This indicator is displayed if the flash button has been pressed and a mode that generates a flash (auto, forced on, or red- eye prevention) has been set.

5Timer mode indicator ................. ☞ pg. 32 This indicator is displayed if the Self timer button has been pressed and the timer mode has been set to either “1 second” or “8 seconds”.

6Macro mode indicator ................ ☞ pg. 36 This indicator is displayed if the macro button has been pressed and the macro mode has been turned on.

7Remaining photos counter

This indicates how many photos can still be taken.

Power Dial and Mode Display

The mode display appears on the LCD panel and screen, when the Power dial is set to certain position. Refer to the chart below for each mode. Press the DSP button to display the image, when the Power dial is set to “A”, “M” or “V”. Hold the Lock button down while turning the Power dial.

Power dial position	LCD panel	On-screen display	Page
SET	SET UP	Displays the SET UP menu	16
B	STILL PB	Displays the playback image	31
OFF	—	—	—
A	CAM AUTO	Displays the image	30
M	MANUAL	Displays the image	34
V	VIDEO	Displays the image	49