JVC GC-QX3 manual Playing Back Still Pictures, Normal Playback, Auto Playback, EN31

EN31

Playing Back Still Pictures

Each picture that you shoot is numbered and saved.

You can then view these saved pictures in sequence, one by one.

3 4 2 1

SET

4 OFF

V

M

Normal Playback

1 Turn the Power dial to “B”.

•Hold the Lock button down while turning the Power dial.

2 Select “STILL PB” with the MODE switch. •“STILL PB” appears on the LCD panel.

3 Press the DSP button to select the display mode.

4 Press the w e button to select the picture that you wish to view.

NOTES:

●To change the display mode during playback, press the DSP button.

Press the DSP button repeatedly to cycle through the following modes:

•Full size screen (with on-screen display)

•Full size screen (without on-screen display)

•6 indexed picture screen

●Playback is not possible if the picture has been processed by a personal computer, other models of camera, etc. or the picture size is other than 2032 x 1536, 1024 x 768 or 640 x 480.

●It takes a little while to display the photographed image on the LCD screen if a lot of images are recorded on the Memory card.

Auto Playback

1 Turn the Power dial to “B”.

•Hold the Lock button down while turning the Power dial.

2 Select “STILL PB” with the MODE switch. •“STILL PB” appears on the LCD panel.

3 Press the DSP button to select the display mode.

4 Press and hold the w e button for more than 2 seconds.

“e”: Displays pictures in order.

“w”: Displays pictures in reverse order.

5 Press the w e button again to stop Auto

Playback.