JVC GC-QX3 manual 2 3,4, Flash Shooting, EN33, There are four flash modes, Auto, Forced on

•Hold the Lock button down while turning the Power dial.

EN33

Flash Shooting

There are four flash modes:

Auto	: This setting automatically flashes when shooting under dark conditions.
Forced on	: Select this setting to force the flash.
Red-eye prevention	: Select this setting to minimize the “red-eye” effect that occurs when using the
	flash. The flash is forced to light.
Off	: Select this setting to disable the flash even when shooting under dark conditions.
	Note that in order to prevent blurry photos a tripod should be used with this
	setting, since the shutter speed is slower.

2 3,4

1

SET

4

OFF

M

V

1 Turn the Power dial to “A” or “M”.

2 Press the Flash button and select the flash mode.

•The “” indicator appears on the LCD panel.

•Press the Flash button repeatedly to cycle through the following modes:

“Off” → “ (auto)” → “ (forced on)”

→“ (red-eye prevention)” → “Off” •If the mode is set to any mode other than

“Off”, charging starts and the flash standby lamp (red) flashes. When the flash standby lamp remains lit steadily, charging is complete.

3 Point the lens at the subject, position yourself, and half-press the Shutter button.

4 Press the Shutter button all the way to take the picture.

•The flash lights and the flash standby lamp (red) begins flashing.

•In red-eye prevention mode, the flash lights twice. The first flash is designed to reduce the red-eye effect. The second flash is when the picture is actually taken.

NOTES:

●Though the image on the LCD screen may appear dark, there is no problem with the recorded image.

●When the flash is turned on, the iris value is set to F2.8/3.8 automatically.

●When shooting with the flash, it is not possible to set the iris and exposure manually.

●Do not press the Shutter button while the flash is being charged.