JVC GC-QX3 82ENTROUBLESHOOTING, Power supply, While shooting, Symptom, Corrective Action, screen

82ENTROUBLESHOOTING

This digital still camera contains a microprocessor. The operation of the microprocessor can be disrupted by electronic noise or interference. If this happens, disconnect the power source (battery, AC adapter, etc.) from the camera, and then resume using the camera. If this does not solve the problem, and taking the action described below also does not solve the problem, contact your nearest JVC dealer.

SYMPTOM CORRECTIVE ACTION PAGE

Power supply

The power does not come on.

● Make sure that the battery is fully charged.	18
● Make sure that the power supply is connected	20
correctly.

While shooting

Cannot shoot photos.	● Make sure that the Power dial is set to “A” or	26
	“M”.
Cannot see the picture on the	● Try turning the power off and then back on again.	26
screen.
Cannot use the menu functions.	● Make sure that the Power dial is not set to “A”.	28
Half pressing the shutter button	● Make sure that there is sufficient light, and make	34
does not focus the camera.	sure that there is enough contrast in your subject.
When there is sunlight in the shot,	● This is not a malfunction.	—
the screen temporarily darkens or
becomes black.
The image on the LCD screen is	● Use the ZOOM lever to adjust the brightness of
dark, or too white.	the LCD screen.
	● You may be playing back a picture in a cold
	location. The LCD screen will appear slightly	51
	darker when it is cold. This is not a malfunction.
	● The LCD screen may be nearing the end of its
	operational life. Contact your nearest JVC dealer.
Memory Full.	● The “MEMORY FULL” message appears when the
	memory is full, making it impossible to take any
	more pictures. Either use a Memory card that has
	some free space in it, or create some free space in	—
	memory by saving pictures to a personal
	computer and then deleting those pictures from
	the camera’s memory.
Color noise appears in contours of	● This is not a malfunction. There is no problem	—
the subject on the LCD screen.	with the recorded images.
The power turned off while	● The power may turn off during flash photography,
attempting flash photography.	even if the remaining battery power is indicated	—
	to be at half of the battery capacity.