Dynamic VPN, Aggressive Mode | D-Link DI-824VUP instruction

Home > VPN Settings > Dynamic VPN Tunnel

VPN Settings - IKE	There are three parts that are necessary to setup the
	configuration of IKE for the dedicated tunnel: basic setup, IKE
	proposal setup, and IPSec proposal setup. Basic setup
	includes the setting of following items: local subnet, local
	netmask, remote subnet, remote netmask, remote gateway,
	and pre-shared key. The tunnel name is derived from the
	previous page of VPN setting. IKE proposal setup includes
	the setting of a set of frequent-used IKE proposals and selecting
	from the set of IKE proposals.
Tunnel Name	Current tunnel name.
Dynamic VPN	This feature works with a VPN software client so the DI-
	824VUP does not need to know the IP address of the remote
	clients.
Aggressive Mode	Enabling this mode will accelerate establishing the tunnel,
	but the device will have less security.
Local Subnet	The subnet of the VPN gateway’s local network. It can be a
	host, a partial subnet, or a whole subnet.
Local Netmask	The netmask of the VPN gateway’s local network.