D-Link manual Resetting the DI-824VUP to the Factory Default Settings

Resetting the DI-824VUP to the Factory Default Settings

After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-824VUP to the factory default settings.

To hard-reset the D-Link DI-824VUP to the Factory Default Settings, please do the following:

Locate the Reset button on the back of the DI-824VUP.

Use a paper clip to press the Reset button and power on.

Hold for about 5 seconds (do not hold for too long) and then release. (Or, release when the status LEDflashes.)

After you have completed the above steps, the DI- 824VUP will be reset to the factory default settings.

98