Using the Configuration Menu

Advanced > Filter > MAC Filters

MAC (Media Access Control) Filters are used to allow or deny LAN (Local Area Network) computers from accessing the Internet and network by their MAC address.

At the bottom of the screen, there is a list of MAC addresses from the DHCP client computers connected to the DI-824VUP. To use them, select one from the drop down list. Next click the “Clone” button. Then click the “Apply” button and the DI-824VUP will fill in the appropriate information to the list.

Disabled MAC Filter

Select this option if you do not want to use MAC filters.

Only allow computers with MAC address listed below to access the network Select this option to only allow computers that are in the list to access the network and Internet. All other computers will be denied access to the network and Internet.

Only deny computers with MAC address listed below to access the network Select this option to only deny computers that are in the list to access the network and Internet. All other computers will be allowed access to the network and Internet.

MAC Address

Enter the MAC Address of the client that will be filtered.

42

Page 42
Image 42
D-Link DI-824VUP manual Advanced Filter MAC Filters