D-Link DI-824VUP manual Advanced Snmp, Enable Snmp Local Remote Get Community

Using the Configuration Menu

Advanced > SNMP

SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DI-824VUP. The DI- 824VUP supports SNMP v1 or v2c.

Enable SNMP

Local

Remote

Get Community

(Simple Network Management Protocol.)

LAN (Local Area Network).

WAN (Wide Area Network).

Enter the password public in this field to allow “Read only” ac- cess to network administration using SNMP. You can view the network, but no configuration is possible wth this setting.

Set Community	Enter the password private in this field to gain “Read and Write”
	access to the network using SNMP software. The administra-
	tor can configure the network with this setting.
SNMP v1	Simple Network Management Protocol (SNMP) is an applica-
	tion layer protocol that facilitates the exchange of management
	information between nework devices.
SNMP v2	Enhanced version of SNMP v1 with additional protocol opera-
	tions such as UDP, IP, CLNS, DDP, and IPX.

47