
Frequently Asked Questions (continued)
How can I setup my
Step 3 Power cycle the cable modem and router:
First turn the cable modem off. Then turn the router off Leave them off for 2 minutes.** Next turn the cable modem on. Wait until you get a solid cable light on the cable modem, and then turn the router on. Wait 30 seconds.
** If you have a
Step 4 Follow step 1 again and log back into the web configuration. Click the Status tab and click the Device Info button. If you do not already have a public IP Address
under the WAN heading, click on the DHCP Renew and Continue buttons.
Static Cable Connection
Step 1 Log into the
lowercase) and the password is blank (empty).
Step 2 Click the Home tab and click the WAN button. Select Static IP Address and enter your static settings obtained from the ISP in the fields provided.
If you do not know your settings, you must contact your ISP.
Step 3 Click on Apply and then click Continue to save the changes.
Step 4 Click the Status tab and click the Device Info button. Your IP Address information will be displayed under the WAN heading.
109