6. Remote Control Buttons
1 “ POWER “Button
This switch turns the player on and off. When player power is off, it is in the wait mode, awaiting instructions from the remote. In wait mode the player consumes only a small amount of power, however, if you don’t plan to play a disc immediately, it is recom- mended that you pull out the power cord or remove the battery to save power.
Once the power has been switched on and the player’s cover opened, the LCD will display a welcome message. This alone consumes significant power. If you are run- ning on batteries and not planning on playing a disc immediately, it is recommended that you do not open the cover in order to save power.
1
2
3
20
2 Number Keys
Pressing the number keys will enter the pressed num- bers into the player module. In most cases the numbers are used to select disc chapters. For example, to select song number three on a disc, press “ 3 “. To select a song above the number 9, press “ +10 “and the appro- priate number. To select, for example, number 23, press “ +10 “twice and then ” 3 “.
When executing system setting commands, occasion- ally the entry of numbers is required, for example for entry of a password number, setting language preferences, etc. Refer to page 31 for a more complete description of system setting operations.
3 C - (SHIFT + SETUP) (Clear) Button
During operation of the DVD player you will need to enter numbers regularly. If you wish to clear numbers in the screen, press the “ C “ button. Also, during execution of any setting for which a graphic appears
1: [SHIFT] + [GUI] 2:[SHIFT] +
7:[SHIFT] + 
] 8:[SHIFT] + [ENTER] 9:[SHIFT] + [
] 0:[SHIFT] + [
] C:[SHIFT] + [SETUP] +10:[SHIFT] + [MENU]
