5. Player Controls (6)
Player Controls (6)
1
2
1 DC IN Power Jack
This DVD player is supplied with an AC/DC adapter for use in the home or for
Important: Use only the Audiovox ap- proved adapter. Use of other adapter may damage the player.
2 Power ON/OFF Switch and System Lock
This switch turns the player on and off. Pushing the switch once to the left turns the player on. Push- ing once again to the left turns the player off.
16
If you press the“ ON/OFF “switch to the right to “ HOLD “position, it will lock the system in place. At this point the player is locked and pressing any key will have no effect on the player.
Once the player has been switched on and the protective cover opened, the LCD screen will display a welcome message. This alone consumes significant power. If you are running on batteries and not planning on playing a disc immediately, it is recommended that you do not open the cover in order to save power.
A note regarding automatic power saving
Once power has been shut off on the main player unit, the system enters wait mode and is prepared to respond immediately to a power on request. In wait mode, the system uses only a minimum amount of electricity and the LCD status window on the front of the main player module will read “ OFF “ (please refer to page 17 for further information). The player may be turned back on using the “ POWER “command on the remote control or by switching the” ON/OFF “button on the left side of the player.When running on battery power, once the player has been off for a period of some time, power consump- tion will be even further reduced (sleep mode) and the LCD status window on the front of the main player will display no message. To start the player again you must push the “ POWER “button on the remote control, or the switch the “ ON/OFF “button on the player.
If you plan to suspend use of the player for a significant period of time, it is recommended that the power cord (or batteries) be removed to prevent unnecessary power drain.
