Customizing the Function Settings
Subwoofer
1.Press the SETUP button.
2.Use 
or 
button to select the Audio, press the ENTER button.
3.Use 
or 
button to Subwoofer, and then press the ENTER button.
4.Use 
or 
button to select the desired setting, and then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Subwoofer
"On" should be selected if your subwoofer is connected. If "Off" is selected, no sound will be emitted by subwoofer.
Note :
• You can adjust the channel balance on your Unit. Please see "ADJUSTING THE SOUND" on page 15.
Pink noise
1.Press the SETUP button.
2.Use 
or 
button to select the Audio, press the ENTER button.
3.Use 
or 
button to Pink noise, and then press the ENTER button.
4.Use 
or 
button to select the desired setting, and then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Pink noise
Off : Pink noise test mode should always be switched off, unless you are testing your speakers.
Left : Pink noise comes out from front left speaker for testing.
Center : Pink noise comes out from center speaker for testing.
Right : Pink noise comes out from front right speaker for testing.
Left sur : Pink noise comes out from rear surround left speaker for testing.
Right sur : Pink noise comes out from rear surround right speaker for testing.
Subwoofer : Pink noise comes out from subwoofer for testing.
Note :
•When using the pink noise generator to test your speakers, you can press the SOUND button on the remote control to adjust the channel balance. Please "Adjusting the Sound" on page 15.
E - 35 | (continued on next page) |
