Memorizing the Channels (continued)
Manual Fine Tuning
1 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
2
3 Press VOL+/- to fine tune till the best possible picture and sound are
If you fine tune a program manually, the AFC will be turned off
Adding and Erasing Channels
1 Use number buttons to directly select a channel that will be added or
2 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
3
4
Channel
Auto Searching |
|
|
Source | Cable |
|
Channel Skip | On | Off |
Fine Tune |
|
|
AFC | On | Off |
Frequency | 55.25 MHz |
|
Move | Select | Menu to exit |
Channel
Auto Searching |
|
|
Source | Cable |
|
Channel Skip | On | Off |
Fine Tune |
|
|
AFC | On | Off |
Frequency | 55.25 MHz |
|
Move | Select | Menu to exit |
When the item is set to on, the selected channel will be erased. When the item is set to off, the selected channel will be added.
The erased channels can not be selected by using the CH+/- buttons unless you use number
16
