Memorizing the Channels
Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the available channels are memorized, use CH+/- to scan the channels.
Selecting the Signal Source
Before your LCD TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i.e., an antenna or cable system)
1 Press MENU to display the menu main
2
3
4
5 Press ENTER or VOL+/- to toggle between Antenna or
If you are connected to an antenna, please select Antenna. If you connect cable, please select cable.
Channel
Auto Searching |
|
|
Source | Cable |
|
Channel Skip | On | Off |
Fine Tune |
|
|
AFC | On | Off |
Frequency | 55.25 MHz |
|
Move | Select | Menu to exit |
Channel
Auto Searching |
|
|
Source | Cable |
|
Channel Skip | On | Off |
Fine Tune |
|
|
AFC | On | Off |
Frequency | 55.25 MHz |
|
Move | Select | Menu to exit |
Storing Channels in Memory Automatically
1 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
The Auto Searching item will be highlighted
2
The unit will begin memorizing all the available channels. During the
Channel
Auto Searching |
|
|
Source | Cable |
|
Channel Skip | On | Off |
Fine Tune |
|
|
AFC | On | Off |
Frequency | 55.25 MHz |
|
Move | Select | Menu to exit |
Auto Searching
CH No 11 | Menu to exit |
Setting Auto Frequency Control (AFC)
1 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
2
3
When the AFC is set to On, the unit will automatically tune the program frequency to provide the best possible picture and sound.
Channel
Auto Searching |
|
|
Source | Cable |
|
Channel Skip | On | Off |
Fine Tune |
|
|
AFC | On | Off |
Frequency | 55.25 MHz |
|
Move | Select | Menu to exit |
15
